router wan

 Presentation 

This archive discloses how to design Cisco switches and access workers for outside modems associated with nonconcurrent and AUX ports. It discloses how to arrange the modem to work appropriately when associated. This report delivers association with a support port, however just regarding ideas, not real establishment rehearses. 

Note: This record isn't a reference for the Microcom or MICA modems utilized inside on the AS5200, AS5300, AS5800, Cisco 2600, or Cisco 3600 switches. This archive is additionally not a reference for simultaneous modems, however there can be various likenesses. This report is a reference for nonconcurrent modems as it were. While a great part of the data here can apply to coordinated modems, don't depend on it when you design them. 

Essentials 

Necessities 

There are no particular essentials for this report. 

Parts Used 

The data in this record depends on the product and equipment forms beneath. 

Cisco IOS® Software Releases 9.21 and later 

A modem that is V.34-fit (or better) 

Note: This report doesn't address stages that have arrived at End of Life status, for example, ASMs, MSMs, CSMs, STS-10s or 500-CSs. 

The data introduced in this archive was made from gadgets in a particular lab condition. The entirety of the gadgets utilized in this report began with a cleared (default) setup. In the event that you work in a live organization, guarantee that you comprehend the likely effect of any order before you use it. 

Shows 

Allude to the Cisco Technical Tips Conventions for more data on archive shows. 

Equipment Configuration 

The initial step to append a modem to a switch is to introduce the equipment. The principle concerns are which links to utilize and why or why not to utilize the comfort port for a modem router wan. 

Cabling Issues 

It is critical to associate the modem to the switch before you design the modem so as to check correspondence between them. In the event that the cabling is erroneous, the remainder of the cycle comes up short.