what is cisco devices

 This document explains how to configure Cisco routers and access servers for external modems connected to asynchronous and AUX ports. It explains how to configure the modem to operate properly when connected. This document addresses connection to a console port, but only with reference to concepts, not actual installation practices what is cisco devices.

Note: This document is not a reference for the Microcom or MICA modems used internally on the AS5200, AS5300, AS5800, Cisco 2600, or Cisco 3600 routers. This document is also not a reference for synchronous modems, though there can be a number of similarities. This document is a reference for asynchronous modems only. While much of the information here can apply to synchronous modems, do not rely on it when you configure them.

Prerequisites

Requirements

There are no specific prerequisites for this document.

Components Used

The information in this document is based on the software and hardware versions below.

Cisco IOS® Software Releases 9.21 and later

A modem that is V.34-capable (or better)

Note: This document does not address platforms that have reached End of Life status, such as ASMs, MSMs, CSMs, STS-10s or 500-CSs.

The information presented in this document was created from devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If you work in a live network, ensure that you understand the potential impact of any command before you use it.